Improvement of thermostability and catalytic efficiency of xylanase from Myceliophthora thermophilar by N-terminal and C-terminal truncation.

Introduction: Extracting xylanase from thermophilic filamentous fungi is a feasible way to obtain xylanase with good thermal stability. Methods: The transcriptomic data of Myceliophthora thermophilic destructive ATCC42464 were differentially expressed and enriched. By comparing the sequences of Mtxylan2 and more than 10 xylanases, the N-terminal and C-terminal of Mtxylan2 were truncated, and three mutants 28N, 28C and 28NC were constructed. Results and discussion: GH11 xylan Mtxylan2 was identified by transcriptomic analysis, the specific enzyme activity of Mtxylan2 was 104.67 U/mg, and the optimal temperature was 65°C. Molecular modification of Mtxylan2 showed that the catalytic activity of the mutants was enhanced. Among them, the catalytic activity of 28C was increased by 9.3 times, the optimal temperature was increased by 5°C, and the residual enzyme activity remained above 80% after 30 min at 50-65°C, indicating that redundant C-terminal truncation can improve the thermal stability and catalytic performance of GH11 xylanase.

Analysis of Ester-Producing Performance in High-Yield Ethyl Hexanoate Yeast and the Effect on Metabolites in Bio- Enhanced Daqu, the starter for Baijiu and other traditional fermented foods.

AIMS: Ethyl hexanoate, one of the key flavor compounds in Strong-flavor Baijiu. To improve the content of ethyl hexanoate in Strong-flavor Baijiu, a functional strain with high yield of ethyl hexanoate was screened and its ester-producing performance was studied. METHODS AND RESULTS: Upon identification, the strain was classified as Candida sp. and designated as ZY002. Under optimal fermentation conditions, the content of ethyl hexanoate synthesized by ZY002 can be as high as 170.56 mg·L-1. A fermentation test was carried out using the ZY002 strain bioaugmented Daqu to verify the role of the strain applied to Baijiu brewing. It was found that strain ZY002 could not only improve the moisture and alcohol contents of fermented grains but also diminish the presence of reducing sugar and crude starch. Furthermore, it notably amplified the abundance of flavor compounds. CONCLUSION: In this study, Candida sp. ZY002 with a high yield of ethyl hexanoate provided high-quality strain resources for the actual industrial production of Baijiu.

Magnetic targeting and pH-microwave dual responsive Janus mesoporous silica nanoparticles for drug encapsulation and delivery.

In this paper, a new Janus-structured nano drug delivery carrier Fe3O4@TiO2&mSiO2 was designed and synthesized, which consisted of a spherical head and a closely connected rod. The head was a nanocomposite of core/shell structure with magnetic spinel ferric tetraoxide core and anatase titanium dioxide shell (Fe3O4@TiO2), and the rod was ordered mesoporous silica (mSiO2). The nanocarriers showed excellent magnetic targeting capability (saturation magnetization, 25.18 emu g-1). The core/shell heads endowed the carriers with fine microwave responsiveness. The pore volume of mesoporous nanocarriers was 0.101 cm3 g-1, and the specific surface area was 489.0 m2 g-1. Anticancer drug doxorubicin could be loaded in the mesoporous of the carriers to form Fe3O4@TiO2&mSiO2-DOX. The drug loading capacity was 10.4%. Fe3O4@TiO2&mSiO2-DOX exhibited acid-sensitive and microwavesensitive release properties along with good bio-compatibility. Fe3O4@TiO2&mSiO2 Janus nanoparticles are expected to be ideal drug carriers. .

Preparation of ionic porous polymers for extraction of four phenolic endocrine disrupting chemicals from fish and water samples.

In this paper, series of ionic polymers were synthesized by crosslinking alkyl quaternary ammonium salts with 1,4-bis(chloromethyl)benzene. Among them, hyper-crosslinked polymer fabricated with dodecyl dimethyl benzyl ammonium chloride (HCP-DD) as monomer delivered superior adsorption performance for endocrine disrupting chemicals (EDCs). The adsorption mechanism mainly includes π-π stacking, hydrophobic and electrostatic interaction. With HCP-DD as solid phase extraction sorbent, a high performance liquid chromatography-diode array detection method was developed for the detection of four phenolic EDCs in water and fish samples. The detection limits of the method were 0.005-0.02 ng mL-1 for water samples and 3-30 ng g-1 for fish samples. The recoveries of EDCs in water samples and fish samples were 80-119% and 81.3-117% (relative standard deviations <4.4%), respectively. The study not only provides a route for preparation ionic porous polymers, but also highlights the applications of ionic polymers as efficient adsorbent to enrich organic pollutants.

Novel magnetic porous organic polymer containing amino and triazine bifunctional groups for efficient adsorption of nitroimidazoles.

In this paper, a novel magnetic hyper-crosslinked polymer with amino and triazine bifunctional groups (M-NH2-THCP) was developed. M-NH2-THCP has strong nitroimidazoles (NDZs) enrichment effect, and therefore it was used as an adsorbent to extract five NDZs from lake water, catfish and shrimp meat prior to HPLC. Polar interaction, π-π stacking interaction, hydrogen bond and Lewis acid-base interaction were attested to be the major adsorption mechanism. The method has a good linearity in the range of 0.1-100 ng mL-1 for lake water, 10-400 ng g-1 for catfish and shrimp muscle with R2 > 0.9964. The limits of detection of NDZs were 0.03-0.04 ng mL-1 for lake water, 1.0-2.0 ng g-1 for catfish and 2.0-2.5 ng g-1 for shrimp, which is superior to most reported method. The method recoveries were 87.6-119 %, and relative standard deviations were less than 8.7 %. M-NH2-THCP holds great application potential in pollutants enrichment, separation and removal.

Green synthesis of azo-linked porous organic polymer for enrichment of nitroimidazoles from water, shrimp and Basa fish.

Reliable monitoring of nitroimidazoles (NDZs) is of great significance to public health. Herein, an azo-linked porous organic polymer (Res-POPs) was prepared by green synthesis method using natural resveratrol as monomer for the first time. Using Res-POPs as sorbent, a facile method coupling solid-phase extraction with high performance liquid chromatography-diode array detection was developed for effective detecting NDZs. The method achieved good linearities (0.06 âˆ¼ 100 ng mL-1 for water, 1.8 âˆ¼ 200 ng g-1 for shrimp, and 1.5 âˆ¼ 200 ng g-1 for Basa fish) with determination coefficients above 0.995, low detection limits (0.02 âˆ¼ 0.05 ng mL-1, 0.60 âˆ¼ 1.00 ng g-1 and 0.50 âˆ¼ 0.90 ng g-1 for water, shrimp and Basa fish), high method recovery (85 %∼114 %) and relative standard deviations below 8.2 %. The results demonstrated the superiority and the promising potential of the established method for detection of NDZs compared with the reported method.

Fabrication of imidazoline-linked cationic covalent triazine framework for enrichment of environmental estrogens.

Imidazoline-linked cationic covalent triazine framework (IM-iCTF) was facilely prepared through the Debus-Radziszewski reaction, involving 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline, formaldehyde and methylglyoxal. The IM-iCTF was applied as a sorbent for cartridge solid-phase extraction (SPE). It provided good adsorption performance for estrogen and estrogen mimics including bisphenol F, bisphenol A, 7ß-estradiol, bisphenol B and estrone. The adsorption isotherm, adsorption kinetic model, thermodynamic calculations and adsorption mechanism were investigated to reveal the adsorption behavior. The IM-iCTF was employed for the extraction of the estrogens and estrogen mimics from water, fish and shrimp (fish and shrimp samples were extracted with acetonitrile before the SPE). The analytes were then determined by high-performance liquid chromatography with diode array detection. The limits of detection were 0.008-0.05 ng mL-1 for water, 0.015-0.11 µg g-1 for fish, and 0.012-0.10 µg g-1 for shrimp samples. This research not only offers a new approach to construct cationic covalent triazine framework, but also provides a reliable strategy for the adsorption/enrichment trace level of organic pollutants.

Construction of magnetic azo-linked porous polymer for highly-efficient enrichment and separation of phenolic endocrine disruptors from environmental water and fish.

Developing effective methods for highly sensitive detection of phenolic endocrine disruptors (EDCs) is especially urgent. Herein, a magnetic hydroxyl-functional porous organic polymer (M-FH-POP) was facilely synthesized by green diazo-couple reaction using basic fuchsin and hesperetin as monomer for the first time. M-FH-POP delivered superior adsorption performance for phenolic EDCs. The adsorption mechanism was hydrogen bonds, hydrophobic interaction and π-π interplay. With M-FH-POP as adsorbent, a magnetic solid phase extraction method was established for extracting trace phenolic EDCs (bisphenol A, 4-tert-butylphenol, bisphenol F and bisphenol B) in water and fish before ultra-high performance liquid chromatography tandem mass spectrometry analysis. The method displayed low detection limit (S/N = 3) of 0.05-0.15 ng mL-1 for water and 0.08-0.3 ng g-1 for fish. The spiked recoveries were 88.3 %-109.8 % with the relative standard deviations of 2.4 %-6.4 %. The method offers a new strategy for sensitive determination of phenolic EDCs in water and fish samples.

Fabrication of chitin based hydrophilic hyper-crosslinked porous polymer for efficiently removing bisphenol A from water.

Water pollution caused by bisphenol A (BPA) has become the world problem. Designing and preparing cost-effective and biodegradable sorbents for the effectively adsorptive removal of bisphenol A from wastewater is of immense significance. Herein, a natural polysaccharide (chitin) was used as raw materials to be grafted with styrene (GS), then crosslinked with α,α'-dichloro-p-xylene (DCX) to form the hyper-crosslinked polymer (labeled as CGS@DCX). The CGS@DCX showed high adsorptive affinity for bisphenol A, with adsorption capacity of 441 mg g-1. Various studies gave an insight into the adsorption process, demonstrating that the highly efficient adsorption of BPA by the CGS@DCX is mainly based on the π-π stacking, hydrogen-bond interaction, polar interaction and pore adsorption. Moreover, the CGS@DCX had high chemical stability, good reusability (9 cycles) and fast adsorption kinetics (10 min) for adsorption of BPA. This work provides a promising strategy for the design and synthesis of novel yet eco-friendly sorbents to solve environmental problems.

Photoresponsive Hydrogen-Bonded Organic Frameworks-Enabled Organic Photoelectrochemical Transistors for Sensitive Bioanalysis.

A facile route for exponential magnification of transconductance (gm) in an organic photoelectrochemical transistor (OPECT) is still lacking. Herein, photoresponsive hydrogen-bonded organic frameworks (PR-HOFs) have been shown to be efficient for gm magnification in a typical poly(ethylene dioxythiophene):poly(styrenesulfonate) OPECT. Specifically, 450 nm light stimulation of 1,3,6,8-tetrakis (p-benzoic acid) pyrene (H4TBAPy)-based HOF could efficiently modulate the device characteristics, leading to the considerable gm magnification over 78 times from 0.114 to 8.96 mS at zero Vg. In linkage with a DNA nanomachine-assisted steric hindrance amplification strategy, the system was then interfaced with the microRNA-triggered structural DNA evolution toward the sensitive detection of a model target microRNA down to 0.1 fM. This study first reveals HOFs-enabled efficient gm magnification in organic electronics and its application for sensitive biomolecular detection.

Green construction of magnetic azo porous organic polymer for highly efficient enrichment and detection of phenolic endocrine disruptors.

Porous organic polymers (POPs) are prominent sorbents for effective extraction of endocrine disrupting chemicals (EDCs). However, green and sustainable construction of functional POPs is still challenging. Herein, we developed a magnetic azo POP (Mazo-POP) for the first time using hydroxy-rich natural kaempferol and low-toxic basic fuchsin as monomers through a diazo coupling reaction. The Mazo-POP exhibited excellent extraction capabilities for EDCs with a phenolic structure. Consequently, it was used as a magnetic sorbent for extracting phenolic EDCs from water and fish samples, followed by ultrahigh-performance liquid chromatography-tandem mass spectrometric detection. The Mazo-POP based analytical method afforded a good linearity of 0.06-100 ng mL-1 and 0.3-500 ng g-1 for water and fish samples respectively, with detection limits (S/N = 3) of 0.02-0.5 ng mL-1 and 0.1-1.5 ng g-1, respectively. The method recovery was from 85.2% to 109% and relative standard deviation was less 5.3%. Moreover, the effective adsorption was mainly contributed by hydrogen bond, π-π interaction, pore filling and hydrophobic interaction. This work not only provides an efficient method for sensitive determination of phenolic EDCs, but also highlights the significance of green preparation of environmentally friendly sorbents for enriching/adsorbing pollutants.

A chitin-based magnetic hyper-cross-linked polymer for highly efficient enrichment of neonicotinoids in lemon juice and tomatoes.

A chitin-based magnetic hyper-cross-linked polymer (labeled as Ch-MHCP) has been successfully synthesized and utilized for highly-effective solid-phase extraction of neonicotinoid insecticides (NEOs). The extraction capability of Ch-MHCP for four common NEOs is higher than that of four commercial sorbents including octadecyl-silane C18, oasis hydrophilic/lipophilic balanced sorbent, oasis mixed anion sorbent and poly-phenylacetic mixed anion sorbent. The large number of hydroxyl and amide groups as well as benzene rings in Ch-MHCP allow the H-bond and π-π* interaction to be the principal adsorption mechanism of Ch-MHCP for NEOs. Besides, polar interaction was also involved in the adsorption process. In combination of Ch-MHCP based extraction technique with high-performance liquid chromatography, a novel analytical method for sensitive detection of NEOs in lemon juice and tomatoes has been established. At optimal conditions, wide linear ranges were obtained to be 0.20-100 ng mL-1 for lemon juice and 0.80-1000 ng g-1 for tomatoes. The detection limits were 0.06-0.12 ng mL-1 for lemon juice and 0.24-0.60 ng g-1 for tomatoes. This work not only provides a powerful tool for simultaneously detecting four NEOs in lemon juice and tomatoes, but also offers a new insight into the preparation of bio-based magnetic sorbents for adsorption/removal of pollutants.

One-step preparation of carboxyl-functionalized porous organic polymer as sorbent for enrichment of phenols in bottled water, juice and honey samples.

Herein, a novel carboxyl-functionalized porous organic polymer (COOH-POP) was prepared as sorbent. Due to multiple hydrogen bonds and π-π interactions between COOH-POP and phenols, COOH-POP shows good enrichment ability and very fast adsorption rate for phenols. Then, an analytical method was developed for determination of five phenols (2-chlorophenol, bisphenol A, 2,6-dichlorophenol, 2,4-dichlorophenol and p-tert-butylphenol) in bottled water, lemon juice, peach juice and honey samples using COOH-POP as solid phase extraction sorbent in combination with high performance liquid chromatography. Under optimal conditions, the COOH-POP based method gave the detection limits (S/N = 3) of 0.02-0.10 ng mL-1 for bottled water, 0.03-0.12 ng mL-1 for lemon juice, 0.03-0.25 ng mL-1 for peach juice and 0.7-1.5 ng g-1 for honey samples. The recoveries for spiked samples ranged from 84.0 % to 119.0 % with relative standard deviation less than 7.6 %. This study provides a new yet effective method for enrichment of phenols by designing carboxyl-functionalized porous organic polymer as sorbent.

Fluorine-functionalized covalent organic framework as efficient solid phase extraction sorbent for adsorption of aflatoxins in nuts.

In this study, a new fluorine-functionalized covalent organic framework (F-COF) was designed and fabricated by the direct polycondensation of tris(4-aminophenyl)amine and 2,3,5,6-tetra-fluoroterephthaldehyde for the first time. F-COF exhibited a remarkably enhanced adsorption capability compared with that of the fluorine-free COF. The favorable adsorption of aflatoxins was attributed to multiple interactions including pseudo hydrogen bond, F-O, π-π, F-π interactions and hydrophobic interactions between F-COF and aflatoxins. By coupling F-COF based solid phase extraction with high-performance liquid chromatography equipped with fluorescence detector, a rapid and sensitive method for determining aflatoxins (aflatoxin B1, B2, G1 and G2) in nuts (peanuts and pistachios) was established. Under optimal conditions (35 mg F-COF, 100 mL sample solution, 3 mL min-1 as sample loading rate, pH<7, 0.2 mL acetonitrile as desorption solvent), the limits of detection for aflatoxins were 0.02-0.30 ng g-1. The linear range was 0.08-16.0 ng g-1 and the recoveries of the F-COF-based method were 83.5-114 % with relative standard deviations less than 8.0 %.

Post-synthetic modification of covalent organic framework for efficient adsorption of organochlorine pesticides from cattle's milk.

Analysis of organochlorine pesticides (OCPs) residues in milk faces a significant challenge. Herein, a sea urchin structured covalent organic framework bearing boric acid groups named COF-B(OH)2 was synthesized and applied as a coating material for solid-phase microextraction (SPME) of the OCPs in cattle's milk. Its performance was superior to that of three commonly used commercial SPME fibers, which could be due to the coexistence of hydrogen bonding, halogen bonding, π-stacking and electrostatic interactions. Besides, the fiber coating displayed good stability and reusability. After optimization, a COF-B(OH)2 based SPME coupled with gas chromatography-electron capture detection was established for the sensitive detection of the OCPs from milk samples. The limits of detection (S/N = 3) were between 0.04 and 1.00 µg kg-1. Satisfactory accuracy was achieved with the method recoveries in the range of 87.5 % to 112.5 %. These results manifest the feasibility of the COF-B(OH)2 coated fiber for the enrichment of the trace OCPs from milk samples.

Anisotropic Multitentacle Janus Particles Synthesized by Selective Asymmetric Growth.

Anisotropic colloidal particles with asymmetric morphology possess functionally rich heterogeneous structures, thus offering potential for intricate superstructures or nanodevices. However, it is a challenge to achieve controlled asymmetric surface partitioned growth. In this work, an innovative strategy is developed based on the selective adsorption and growth of emulsion droplets onto different regions of object which is controlled by wettability. It is found that the emulsion droplets can selectively adsorb on the hydrophilic surface but not the hydrophobic one, and further form asymmetric tentacle by the interfacial sol-gel process along its trajectory. Janus particles with an anisotropic shape and multitentacle structure are achieved via integration of emulsion droplet (soft) and seed (hard) templates. The size and number of tentacles exhibit tunability mediated by soft and hard templates, respectively. This general strategy can be expanded to a variety of planar substrates or curved particles, further confirming the correlation between tentacle growth and Brownian motion. Most interestingly, it can be employed to selectively modify one region of surface partitioned particles to achieve an ABC three-component Janus structure.

Evaluation of microcirculation in asymptomatic cerebral infarction with multi-parameter imaging of spectral CT.

OBJECTIVE: To investigate the role of spectral CT multiparametric imaging in the evaluation of cerebral microcirculatory perfusion. METHODS: The imaging data of 145 patients with asymptomatic cerebral infarction confirmed by MR were retrospectively analyzed, and all cases underwent head CTA and cranial CT perfusion imaging (CTP) on double-layer detector spectral CT. Single energy level images (MonoE45 keV), iodine density maps, and effective atomic number maps were reconstructed based on spectral CTA data, and CT values, iodine density values, and effective atomic number values were measured in the infarcted area, healthy control area, centrum semiovale and posterior limb of the internal capsule, respectively; perfusion values, such as cerebral blood volume (CBV) values, cerebral blood flow (CBF) values, time to peak (TTP) values, and mean passage time, were measured in the above-mentioned areas on CTP images. (TTP) values, and mean time to passage (MTT) values. CT values, iodine density values, effective atomic number values, and perfused CBV, CBF, TTP, and MTT values were compared between the infarcted area and the healthy side, the center of the hemianopia, and the posterior limb of the internal capsule. The role of spectral CT parameters and perfusion parameters in the evaluation of asymptomatic cerebral infarction was analyzed. RESULTS: CT values, iodine density values, and effective atomic number values were statistically different between the infarcted area and the healthy side; CT values, iodine density values, and effective atomic number values were not statistically different between the infarcted side and the healthy side of the hemispheric centrum and the posterior limb of the internal capsule; CBV and CBF were statistically different between the infarcted side and the healthy side, and MTT and TTP were not statistically different. There were statistically significant differences in TTP between the infarcted area and the healthy side of the hemiaxial center, and no statistically significant differences in CBV, CBF, and MTT. There were no statistical differences in CBV, CBF, TTP, and MTT in the inner capsule area. ROC curve analysis of spectral CT-related parameters and CT perfusion parameters for the diagnosis of asymptomatic cerebral infarction: area under the curve of MonoE 45Kv 0.71, area under the curve of iodine density values 0.76, area under the curve of effective atomic number values 0.74; area under the curve of CBV value 0.64, area under the curve of CBF value 0.61, area under the curve of MTT value 0.50, The area under the TTP curve was 0.52. The area under the ROC curve of the multivariate logistic regression model based on spectral parameters is 0.76, which is higher than that of the logistic regression model with perfusion parameters (P < 0.05). CONCLUSION: Spectral CT can better demonstrate small intracranial ischemic lesions, and iodine density values have a better evaluation of microcirculation in asymptomatic cerebral infarcts.

MnO2 nanoflowers based colorimetric and fluorescent dual-mode aptasensor for sensitive detection of aflatoxin B1 in milk.

Aflatoxin B1 (AFB1) with tremendous toxic effects has caused a serious threat to food security. Accurate quantification of AFB1 in food can effectively prevent the risk of human intake of AFB1. Herein, a colorimetric and fluorescent dual-mode aptasensor for accurate and sensitive detection of AFB1 has been developed based on MnO2 nanoflowers (MnO2NFs) for the first time. MnO2NFs could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidation product (TMBox) by H2O2, which would be used for visible detection of AFB1. Simultaneously, MnO2NFs can be served as a signal amplifier and reduced by ascorbic acid to generate lots of Mn2+ which would quench the fluorescence of calcein for fluorescent detection of AFB1. Both colorimetric and fluorescent methods have been successfully applied for determination of AFB1 in milk samples with satisfactory results. The proposed dual-mode detection method with high detection sensitivity and accuracy showed great promise for monitoring AFB1 in food.

Preparation of a magnetic phosphazene-based hyper crosslinked polymer for the fast and efficient extraction of chlorophenols from water and peach juice.

Two magnetic phosphazene-based hyper crosslinked polymers (M-HCP-OP-TMC and M-HCP-OP-TCL) were newly synthesized by the reaction of Friedel-Crafts acylation, and the M-HCP-OP-TMC showed an excellent extraction capability and rapid adsorption kinetics for chlorophenols as an adsorbent. Then, an efficient analytical method was built for the preconcentration and quantification of chlorophenols from water and peach juice samples by combining M-HCP-OP-TMC based magnetic solid-phase extraction (MSPE) with HPLC-UV detection. The linear response range for the chlorophenols by the method was 0.21-100.0 ng mL-1 for water sample, and 0.36-100.0 ng mL-1 for peach juice sample. The detection limits (S/N = 3) of the proposed method for the analytes were 0.07- 0.25 ng mL-1 and 0.12-0.45 ng mL-1 for water and peach juice samples, respectively. The method recoveries for the spiked samples were in the range of 93.1%-117.1%, and the relative standard deviations were less than 10%. The adsorption of the chlorophenols with the M-HCP-OP-TMC was mainly contributed by π-π stacking and hydrophobic interactions. The results indicate that the method was sensitive and accurate enough for the determination of the chlorophenols from real samples.

Simultaneously Enhanced Thermostability and Catalytic Activity of Xylanase from Streptomyces rameus L2001 by Rigidifying Flexible Regions in Loop Regions of the N-Terminus.

The GH11 xylanase XynA from Streptomyces rameus L2001 has favorable hydrolytic properties. However, its poor thermal stability hinders its widespread application in industry. In this study, mutants Mut1 and Mut2 were constructed by rationally combining the mutations 11YHDGYF16, 23AP24/23SP24, and 32GP33. The residual enzyme activity of these combinational mutants was more than 85% when incubated at 80 and 90 °C for 12 h, and thus are the most thermotolerant xylanases known to date. The reduced flexibility of the N-terminus, increased overall rigidity, as well as the surface net charge of Mut1 and Mut2 may be partially responsible for the improved thermal stability. In addition, the specific activity and catalytic efficiency of Mut1 and Mut2 were improved compared with those of wild-type XynA. The broader catalytic cleft and enhanced flexibility of the "thumb" of Mut1 and Mut2 may be partially responsible for the improved specific activity and catalytic efficiency.